Skip to main content

Posts

Showing posts from February, 2007

Effective Use of Ping Utility

Ping is a network utility to check the connectivity between two nodes in a computer network. Ping sends ICMP packets to destination device and if the packets reach the destination successfully, source device will receive ICMP replies. If the ICMP packets failed to reach the destination, we will get ping packet loss reply. ICMP is the short form of Internet Control Message Protocol. To check the connectivity of a destination host, say a website, follow the instructions.
Open Command Prompt

type ping [Destination Address] and press enter.

Eg: ping www.corenetworkz.com


Practical Uses of Ping Command How to Change Default TTL Value Set On  Packets

 Transmit failed. General Failure

Automatically Set Continuous Echo Requests To a Destination Until We Manually Stop

How to Change Default Size of ICMP Echo Request On Your Computer(ping -l)

How to Check Optimium MTU Size Value Of Your Network

Packet Needs To Be Fragmented But DF Set -Reason and Solution

Tell Packets to Don't Fragment While in Test


H…