In this tutorial I am explaining the steps to configure Belkin Wireless N router F5D8233-4 by accessing the web based setup page. Though this tutorial is for a specific Belkin router model, you can use the same procedure to setup most of Belkin Router models. This tutorial is for those who want to setup their router manually without running the setup CD from Belkin. If you want to configure your Belkin router by running the setup CD ,click on the link below for instructions.
How to Configure Belkin wireless router by running setup CD
In this page you can see instructions to run the CD and setup Belkin wireless router. However, to set advance settings on your router it is better configure router by accessing the web based setup page and set the settings manually.
Before accessing the web based setup page connect Wireless Router to the computer as shown in the image. Here Ethernet port (LAN Port) of the computer is connected to the LAN port of Belkin router using an Ethernet cable. It is like:
Now unplug the power cable from the modem. Let the Belkin router and the computer powered on. Steps to setup Belkin Router by accessing the setup page are:
PS: It is very important that the modem must be switched off while configuring the Belkin Router
1. Access Belkin setup page
To access Belkin's web based setup page type 192.168.2.1 on the address bar of the browser.
The default login IP address of most of Belkin Wireless routers is 192.168.2.1
2.Enter the Router Password
By default there is no password set for the Belkin router and you just simply click submit button to log on to Belkin router setup page.
3. Setup the connection type ( Internet WAN)
Click on Internet WAN and select the connection type you want.
Configure Belkin Router for Cable Modem
If you have Cable Internet connection, you should select Dynamic IP option. In most cases you may need to type the host name provided by Cable Internet Service Provider. In addition to this to work Belkin Router with cable modem, you may need to clone the MAC address of your computer using the link/button change MAC address.
Setup Belkin Router for DSL Modem
To configure DSL Internet connection you should select PPPoE as the connection type.
Here you should enter the user name and password provided by your Internet Service Provider. After entering the details you should click on save settings. Now your Belkin router is configured in PPPoE. In the same way your can setup your Belkin router for static IP and PPTP.
4. Change the LAN settings in Belkin Router
You can change the router IP address and you can enable or disable the DHCP function on the Belkin router using this window. By default belkin router IP address is 192.168.2.1 but you can change it to any other valid IP address.
5. Setup Wireless feature in Belkin Router
To edit the wireless settings, click on Wireless tab in the setup page. You can edit the Wireless network name and wireless channel here.
Wireless name (SSID) is the name of your wireless network. The most recommended wireless channel is 6. You can use wireless channel 1 and 11 too.
6. Enable Wireless Security in Belkin
To enable wireless security on Belkin router click on security under wireless tab and follow the instructions in the link below.
enable wireless security in Belkin wireless router
You should update Belkin Router Firmware
It is very important that you should update Belkin router firmware after configuring the router. To know how to update the firmware click on the link below.
How to Update Firmware in Belkin Router
You can select various security settings from the list provided here. To enable a secured wireless network follow the instructions given in the link.
Protect your wireless network from hackers
There are some other points you must care after configuring the router. One of them is to ensure the safety of the wireless network. It is a nice practice to enable MAC address filtering in Belkin Router to avoid any unauthorized access to your wireless network. To learn how to enable MAC address filter in Belkin wireless router, please follow the link below.
How to enable MAC Address Filter in Belkin router
Some users says they were able to access Internet before adding Belkin router in their network. After installing the router, they are not able to go online. If you face such an issue after setup Belkin Router in your network, follow the link below to fix the issue.
I cannot go online after installing router
New Topics
How to Configure Belkin wireless router by running setup CD
In this page you can see instructions to run the CD and setup Belkin wireless router. However, to set advance settings on your router it is better configure router by accessing the web based setup page and set the settings manually.
Steps to configure Belkin Wireless N router
Before accessing the web based setup page connect Wireless Router to the computer as shown in the image. Here Ethernet port (LAN Port) of the computer is connected to the LAN port of Belkin router using an Ethernet cable. It is like:
- LAN Port of Modem is Connected to Internet Port of Belkin Router
- LAN Port of Belkin Router is connected to LAN port of Computer
- Belkin Router is Switched On
- Computer is Switched on
Now unplug the power cable from the modem. Let the Belkin router and the computer powered on. Steps to setup Belkin Router by accessing the setup page are:
PS: It is very important that the modem must be switched off while configuring the Belkin Router
1. Access Belkin setup page
To access Belkin's web based setup page type 192.168.2.1 on the address bar of the browser.
The default login IP address of most of Belkin Wireless routers is 192.168.2.1
2.Enter the Router Password
By default there is no password set for the Belkin router and you just simply click submit button to log on to Belkin router setup page.
3. Setup the connection type ( Internet WAN)
Click on Internet WAN and select the connection type you want.
Configure Belkin Router for Cable Modem
If you have Cable Internet connection, you should select Dynamic IP option. In most cases you may need to type the host name provided by Cable Internet Service Provider. In addition to this to work Belkin Router with cable modem, you may need to clone the MAC address of your computer using the link/button change MAC address.
Setup Belkin Router for DSL Modem
To configure DSL Internet connection you should select PPPoE as the connection type.
Here you should enter the user name and password provided by your Internet Service Provider. After entering the details you should click on save settings. Now your Belkin router is configured in PPPoE. In the same way your can setup your Belkin router for static IP and PPTP.
4. Change the LAN settings in Belkin Router
You can change the router IP address and you can enable or disable the DHCP function on the Belkin router using this window. By default belkin router IP address is 192.168.2.1 but you can change it to any other valid IP address.
5. Setup Wireless feature in Belkin Router
To edit the wireless settings, click on Wireless tab in the setup page. You can edit the Wireless network name and wireless channel here.
Wireless name (SSID) is the name of your wireless network. The most recommended wireless channel is 6. You can use wireless channel 1 and 11 too.
6. Enable Wireless Security in Belkin
To enable wireless security on Belkin router click on security under wireless tab and follow the instructions in the link below.
enable wireless security in Belkin wireless router
You should update Belkin Router Firmware
It is very important that you should update Belkin router firmware after configuring the router. To know how to update the firmware click on the link below.
How to Update Firmware in Belkin Router
You can select various security settings from the list provided here. To enable a secured wireless network follow the instructions given in the link.
Protect your wireless network from hackers
There are some other points you must care after configuring the router. One of them is to ensure the safety of the wireless network. It is a nice practice to enable MAC address filtering in Belkin Router to avoid any unauthorized access to your wireless network. To learn how to enable MAC address filter in Belkin wireless router, please follow the link below.
How to enable MAC Address Filter in Belkin router
Some users says they were able to access Internet before adding Belkin router in their network. After installing the router, they are not able to go online. If you face such an issue after setup Belkin Router in your network, follow the link below to fix the issue.
I cannot go online after installing router
New Topics
63 comments:
hey buddy, really thanks for your timely help... ur post helped me thoroughly to make a secure wi-fi connection......
Thanks alot...
<a href="www.hbzjkx.com> karthik</a>
It is really nice to hear.
i did all these steps but still i am not able to set up a good wireless network.its always limited or no connectivity.not even once i got good wireless connection.plzzz help me.i hv belkin N router.
Limited or no connectivity can be due to many reasons. I hope this particular post will help you.
http://www.corenetworkz.com/2009/08/wireless-connection-limited-or-no.html
Always make sure that you are typing the correct wireless key while it prompt you to enter wireless key (WEP or WPA key)
I am happy now, I was looking for a technician to setup my Belkin Wireless router. When I google with Belkin router setup I saw this page. Now I setup my Belkin Wireless router with this guide. Thank you and may God bless you...
Can I setup Belkin Wireless G router using the steps you wrote? I have a wireless G router from Belkin and looking for a help to setup it.
Hellooo
im sooo saddend and pissed of at Belkin!!
I have belkin router,and i got a nintento Wii
So i wanted to install the wireless for the wii but it wouldnt work, so i called the Wii helpdesk they said call the router ppl..
soo i called belkin helpdesk. The dude said ill email you how to change your channel for the router.
He did what he said
then i ran in to the problem, in the email there is the link to the setup page ( 192.168.2.1)
BUT ITS NOT WORKING. so i called them back and he said i dont know why itst working.
sorry cant help you!!!!!!!!!!!!!
Sooo can anyone help me.
please
The default login IP address of Belkin router is 192.168.2.1
If it is not working try following things.
1. Reset Belkin Router
There is a reset button on Belkin router. Press that button for 30 seconds using a pen (make sure power light is blinking that time)
2. Power cycle router
Disconnect power from Belkin router for 30 seconds and connect it back
3. Connect computer to the first LAN port of the Belkin (make sure modem is not connected to the router)
4. Try to access Belkin
Access Belkin setup page using 192.168.2.1 ip address
If still facing issues ,you should clear browser temporary files.
Hope this will help you.
Can I enable WPA2 in Belkin router ?
Thanks for your post. Saved me lots of time. very strait forward and right to the point.
@Anonymous
We can use WPA2 wireless encryption in Belkin Wireless router.
Can I configure Xbox 360 with Belkin router ? Can you provide me the setup steps ?
Thanks buddy. I successfully configure my Belkin router. I enabled Wireless too
what happens if i can't log in with my password.....stupid i know!
If you forget the login password of your Belkin wireless router, follow the steps mentioned the link below.
http://www.corenetworkz.com/2010/06/forgot-my-router-password-and-cannot.html
I have a Belkin N Wireless 75AC57,, model F5D8236-4 v2 router. It was working good until I messed with it to try to add another wireless device (Nintendo DSi xl) and found that I had to change the security settings to do this. I didn't know what I was doing at that time. Now I've figured out what I should have done, but my Belkin Router icon has disappeared. Cannot access the router default reset online webpage because it says the link is broken! Called Belkin helpdesk and that is what happened when they also tried to have me access this web page.
I understand there is also a reset button on the router, but I cannot find it. I was told it is probably on the bottom of the router, but the only thing I see there is the plastic stand that holds the router in a vertical stand-up position. I have tried to take the stand off, but it doesn't seem to come off, and I don't want to break that too! Any ideas from anyone?
The reset button is on the side that wraps around to the rear where the connections are(oppisite side where "Belkin" is imprinted". It's in the center near the "top" (where the antennas are) Use a paper clip or similar to press it.
Can u tell me how to setup if your internet is connected with your telephone line because when i try your steps my telephone won't work
Please make sure that your modem is connected to the Belkin router, not the telephone line directly to the Belkin.
The setup should be like this:
Telephone line splitter --- Modem and Telephone.
Modem --- Belkin router
So here you make sure that the correct cable from splitter is going to the Telephone and modem. You can check your Internet Service Provider (DSL) manual for the exact diagram.
Can the N Wireless Modem Router support a Vonage VOIP phone?
This model of Belkin router help you to connect your voip to Internet. You may need a Voip adapter
Hey Siju you really seem to be the only one online who can help me. I have called my ISP and Belkin help desk and neither can so far...
First of all I have 2 Belkin N routers. The reason for this is my house is a little too big for the range of just one in the position where I had to put it - ie at one side of the house.
I bought another one to try and set it up as a repeater. The trouble is when plug out my internet cable from the router and I go to try and setup the router my default gateway address in ipconfig is gone. I'm afraid to reset the router completely because it took me ages originally to get just the one router working. Is there a simple way to get these two speaking?
You would really be helping me out.
Hi Derek,
I understand from your question that you have 2 Belkin wireless N routers and you want to use the second one as a wireless repeater.
Could you please explain the following sentence a little more as I failed to understand it
"
The trouble is when plug out my internet cable from the router and I go to try and setup the router my default gateway address in ipconfig is gone."
I have a belikn N router every thing was fine until I added my blackberry I have now lost all wireless connections what can I do ???
We have a Belkin Wireless Router. The wireless connection was set up using a Mac. Now when friends are here with their PC laptops, they cannot connect to the Wireless yet anyone with a Mac can. Why is that? We have tried both the main wireless password and the guest option... neither will work with PC's. Can you help?
@Anonymous
May I know your Belkin Wireless settings ? Without changing any settings in Belkin router, your computers will loose network connection (except frequency issues)
@Cd
Try to change your SSID, Wireless channel and beacon interval.
Also make sure there is no MAC filtering is enabled in your Belkin router.
I ju1st brought a Belkin N router, The set up is working prefectly but I also have a Cannon computer that has Wi-Fi so what I want know how do I set up my printer with the router to go wireless? Please Help!
This really works.. thankssss a lot....
Its really works... Thanks....
THANK YOU VERYYY MUCH!!!! just set up my N+ router in seconds
so i have a belkin n+ router and it works fine with everything but when i play my ps3 online, it always get connection interrupted. i noticed that every time i type in my ISP info that it wont accept it forcing me to change it back to a dynamic connection. i just want to know if u know how to make the belkin router accept my info because before it worked perfectly then i had to change my internet info and it wouldnt accept it anymore
Belkin Router should accept your Internet connection details without any error if it is in a correct format. If you face issues then follow the steps below.
1. Reset Belkin Wireless Router
Click on the link for more details about how to reset Belkin router.
http://www.corenetworkz.com/2010/06/how-to-reset-router-or-modem-hard-reset.html
If still you face the issue, you may update teh firmware of your Belkin router.
Dear technical assistance:
I need your advice concerning with "BELKIN F5D8231-4 V1000 ROUTER" which I use. I wanted update the program (Firmware Update) with V5000 but it automatically cancelled and said that I used wrong update. After that I cant connect to my computer for going to this(192.168.2.1 ) address. Also I tried to push RESET button, but it's also didn't helped. How can I restore the program.
After " Firmware Update " it's can't connect to local network and couldnt find it's address (192.168.2.1). I tried RESET but its also didn't help and the routers blue light blink all the time. Also I tried to do 30/30/30 hard reset ( I read it in forums) but again no result. How can I return the program?.
Sincerely,
Vahe Khachatryan
E-MAIL V.XACHATRYAN@MAIL.RU
Hi Vahe Khachatryan,
The default login IP of BELKIN F5D8231-4 V1000 ROUTER is 192.168.2.1 Even if you are not able to access the router webpage via this IP address, it means you did not reset the router properly.
To do proper reset for your Belkin router follow the steps below.
1. Locate the reset hole on the Belkin router
2. Use pen to press the reset hole for 30 seconds (make sure the power light of Belkin router is blinking
3. Take of your hands from reset button and wait till the light is steady .
Do a power cycle for your Belkin router.
How to Perform Power Cycle
Now try to Upload firmware from the Belkin router firmware upgrade page. (I mean from Belkin web based setup page)
hey, i need someone to help me, I have Belkin router, i was connected the last few days, suddenly the connection unabled to connect using my laptop thru wireless connection,
Can You tell me how many computers are connected to your Belkin router?
Is this connection problem only for your laptop ?
i can connect to my pc but i can't find my network name to my notebook ,,,can you help me pls
If your PC can connect to Belkin wireless network, your router settings are fine. So it is better have a look at the adapter side (of netbook). Have a look at the link below.
http://www.corenetworkz.com/2009/08/my-laptop-is-not-getting-wireless-and.html
Instructions were great!!!! AT&T wanted to charge 50 bucks for the same info....such a rip off! And they were the ones who caused the problem in the first place. I'm glad I found your post. I was up and running again wireless in less than 5 minutes! THANKS!!!!
This was great after agonizing over how to connect my new laptop for hours I looked this up and within ten minutes had it running.
Great advice on this site well done guys,
I have a belkin f5d8233-4v3 problem,
I went round to help an old friend connect their new pc to their wireless network , I thought it would be as simple as finding the wireless network pressing connect and job done but although their network name is available I cannot connect their new pc and have even tried my iPhone 4 bit same message displayed when I click to connect, there is no password on the router and all we get is unable to join the network
Can anyone help an old timer out lol
Cheers
Hi Jay,
Please follow the link below to troubleshoot the issue.
http://www.corenetworkz.com/2010/06/wireless-network-keep-connecting-and.html
that relly works.... :)
THANK YOU!
Can I connect linksys Range extender with Belkin router?
Hi, I have just bought a Belkin N600 DB. It has a USB input where you can connect a HD, which can become a common drive for all connected to the router. I have tried many combinations with no success. Appreciate your feedback/support
I made some false settings in my belkin router. Can you tell me how to reset that settings and reconfigure my belkin router ?
In order to reset your belkin router follow the link below.
http://www.corenetworkz.com/2010/06/how-to-reset-router-or-modem-hard-reset.html
After reset your router, you can setup it again by following the steps mentioned in this article.
I have a Belkin Playmax Wireless F7D4401v1 Modem/Router. Seems that my downloads especially from YouTube are very slow. What are the optimum settings for this unit? I have a MacBook Pro and a Mac Desktop and both seem to suffer from the same problem on this router.I use Exetel ADSL2+ ,current bandwidth reading is:
129.70kbps. It should be much faster.
you can tell me about normal Belkin Router settings
Siju...You rock man..!!!
Amazing post, made my life easy to set Belkin and discover vonage resetting in a diff way...
Good to see nice people around...
Cheers ~Harish
Hi Harish,
Thanks for your comment.
@Anonymous
Are you getting high speed when the Belkin router is removed and computer directly connected to the modem ?
after 3 days and calling tech support 4 different times and not being able to connect the belkin router to my modem....i kept getting a message from my computer saying that there was a bad connection unplug and replug ....so i did with a different yellow lan cord and it worked perfectly. the networking cable that was shipped with the router was bad.
Its good to know that you found it by yourself.
You provided steps to configure this device by accessing the setup page. I do not want to access belkin router. I want to know how to configure it?
Belkin wireless N router.. Works perfectly for our laptop, but very poor signal for other wireless devices in the house. my sons ps3, and android cell phones get very poor connections. any help?
Make sure there is no compatibility issues with wireless encryption used on Belkin Router and your wireless devices.
I recommend you to change the wireless encryption you are using on Belkin Wireless router and check for the issue.
I purchased a Belkin model F7D7302 new in the box. I followed all the steps and received a message to call Belkin. When I called they insisted I pay $40 before they would support the product. The thing does not work and appears to be some sort of scam. I recommend that everyone avoid buying this junk.
Have you received any error message while configuring your Belkin router?
I recommend you to reset your router and reconfigure it. To reset your Belkin router, follow the link below.
http://www.corenetworkz.com/2010/06/how-to-reset-router-or-modem-hard-reset.html
Has anyone figured out how to rename the router's workgroup to something other than "Workgroup"?
Previous "hidden" pages htm don't work. Have piddled around with several variations, and so far, no luck.
http://ROUTER_IP/util_storage_admin.htm *does not* work on the N600DB
I don't know where else to post on this POS router (F5D8235-4 v2), but I'm probably going to toss it in the garbage if I can't find a workaround.
All I want to do is give the router a PASSWORD other than the default password of BLANK. Sounds easy? Right? When you go to the change password page and type in your new one (remember the old one is blank or empty), it ALWAYS barks back saying "Current Password is invalid"! The current password is blank, so an empty input box should suffice, right?
I tried other browsers with the same results (FF, IE, Opera).
Madness, I tell you. Madness!
It seems strange, if you are not able to create a password for your router, I suggest you to follow the steps below.
1. Perform a firmware upgrade (Updating to latest firmware can fix most of the router issues). If still issue persists, follow step 2
http://www.corenetworkz.com/2009/07/update-firmware-of-belkin-wireless-n.html
2. Reset the Belkin Router and reconfigure
Belkin is not good router, It's insecure and not stable connection.
Clik Login, and see the source you will see the password login. So, WPA will be useless. You are really under high risk by using Belkin Router.
Updating firmware doesn't solve the big Belkin mistake.
Post a Comment