menu
close

Setup Nokia Siemens Residential Router 1600 with BSNL

Nokia Siemens Residential Router 1600 is one of the common modems provided by BSNL. One of my friends lost the setup disc came with this device and struggled a lot at the time of reconfiguration. In this tutorial, you can learn how to setup BSNL Internet connection using Nokia Siemens Residential Router 1600. Just like other BSNL modem/ router models, we do not need setup disc to configure it. We can do it manually by following the steps provided in this tutorial. At the end of the tutorial, you can see the steps to activate WiFi and wireless security on Nokia Siemens Residential Router 1600.


Configure Nokia Siemens Residential Router 1600

In order to configure this device with BSNL broadband, follow the steps below.
  1. Connect Nokia Siemens Residential Router 1600 to the computer using Ethernet cable

  2. Power on the modem

  3. Type 192.168.1.1 on the address bar of Internet Explorer and press enter
    nokia modem

    Username: admin
    Password: admin

    Now you can access the web-based setup page of Nokia Siemens Residential Router 1600 by entering the login details given. You will be redirected to device info page where you can read basic information about it. You can select the right option to set up this device from the left-hand side menu.
    Network

  4. Click on Advanced Setup
    model

    Delete all connections except VPI/VCL 0/35.

  5. Click Edit button of 0/35
    atm

    Click next. Here we must make sure the value set for VPI is 0 and VCI is 35.
    pppoe

  6. Select PPPoE

    We need to configure PPPoE connection with BSNL modem. So we should select PPP Over Ethernet (PPPoE). Now we should enter the BNSL broadband username and password.
    selection

    We should check

    i. Enable PPP Debug Mode
    ii. Bridge PPPoE Frames Between WAN and Local Ports

    Now click on Next

  7. Enable NAT in Nokia Siemens Residential Router 1600
    Set NAT in Nokia Modem

    We should check

    i. Enable NAT
    ii. Enable WAN Service

    Click Next

  8. Click on Save and we will automatically redirect to the main page.


    We should click on Save/Reboot button there. After this step, we should go to Management (on the left-hand side) and click Save/Reboot to save the current settings properly.

Popular Tutorials
  1. Configure Teracom WiFi Device

  2. Nokia Siemens C2110 ADSL

  3. Setup Internet in WA 3002 g1 UTStarcom ADSL Type 2

Technology Blog