My previous article was about setup Internet connection on Teracom router. Now it is the time to configure WiFi and WiFi security on Teracom router with BSNL DSL Connection. BSNL provides Teracom modem with routing facility. So, though it is a modem we can connect multiple computers to it if DHCP server is enabled on the configuration page. Setup wireless in Teracom wireless router is as simple as selecting the radio Wireless Network. In Wireless settings page we can select the proper encryption to secure its WiFi network from external intruders. This device has the facility to enable MAC Address Filtering to provide additional security. Let us check step by step how to setup WiFi security on this device.
BSNL Broadband Configuration -Part 1
1. Login to BSNL Teracom Wireless Modem
Please note that default Login IP address of Teracom Router is 192.168.1.1 but if you change that IP address, you should use the new IP address to the login setup page.
If you are looking for steps to setup Internet on this device, click on the link below.
Configure Internet Connection On BSNL Modem
2. Go to Wireless Settings Page
Click on Wireless Network which located under Configuration tab. In this page, you can activate WiFi on BSNL Teracom modem.

3. Enable Wireless Security on Teracom Router
It supports the following encryption standards.

If you are a home user and just need security and not worry much about it, the easier one is WEP 64 Bit Encryption. If you select this as the security option, you can type any hexadecimal number ( 0-9 and A-F) as the wireless key. Don't forget to click on confirm button. Now onwards you need to enter this ten digit key to log in to your wireless network.
If you are very much conscious about the security of your wireless network, I recommend you to use WPA or WPA2. Then you should select Wi-Fi Protected Access or Wi-Fi Protected Access2 from the drop-down menu. You can select authentication mode for Teracom Wireless network as PSK and enter the Pass Phrase. After this, without this PassPhrase, no computers are allowed to join your wireless network.
4. Troubleshoot Teracom Wireless Configuration
If you are facing any issues with connecting devices to WiFi network, follow the steps provided in the link below.
How to Troubleshoot a WiFi Network
In this tutorial, you have learned how to configure wireless on Teracom modem for BSNL Internet connection. You have also learned how to enable wireless security with BSNL connection. Teracom modem WiFi configuration is the same for most of the Teracom models. To learn how to configure Teracom modem with BSNL connection click on the link below. The configuration step is same for most of the BSNL type 2 modems.
How to Configure Broadband On BSNL Modem in PPPoE Mode
Technology Blog
BSNL Broadband Configuration -Part 1
Setup Teracom Router Wireless security With BSNL
1. Login to BSNL Teracom Wireless Modem
Please note that default Login IP address of Teracom Router is 192.168.1.1 but if you change that IP address, you should use the new IP address to the login setup page.
- Type 192.168.1.1 on the address bar of your browser and press enter.
- Now you will be prompted to enter Teracom router username and password.
Default BSNL modem username and password is :
User Name: admin
Password: admin
- Now click OK to login. Now you will be in BSNL overview page.
If you are looking for steps to setup Internet on this device, click on the link below.
Configure Internet Connection On BSNL Modem
2. Go to Wireless Settings Page
Click on Wireless Network which located under Configuration tab. In this page, you can activate WiFi on BSNL Teracom modem.

- Turn on WiFi by selecting enable button opposite to Wireless Network.
- You can change the name(SSID) of your network by typing any name on the field Network Name(SSID).
- It is better to select channel selection auto because then the device will choose the best channel automatically.
- You can hide SSID by selecting Yes to Hide SSID
3. Enable Wireless Security on Teracom Router
It supports the following encryption standards.
- WEP 64 bit encryption
- WEP 128 bit encryption
- Wi-Fi Protected Access
- Wi-Fi Protected Access 2

If you are a home user and just need security and not worry much about it, the easier one is WEP 64 Bit Encryption. If you select this as the security option, you can type any hexadecimal number ( 0-9 and A-F) as the wireless key. Don't forget to click on confirm button. Now onwards you need to enter this ten digit key to log in to your wireless network.
If you are very much conscious about the security of your wireless network, I recommend you to use WPA or WPA2. Then you should select Wi-Fi Protected Access or Wi-Fi Protected Access2 from the drop-down menu. You can select authentication mode for Teracom Wireless network as PSK and enter the Pass Phrase. After this, without this PassPhrase, no computers are allowed to join your wireless network.
4. Troubleshoot Teracom Wireless Configuration
If you are facing any issues with connecting devices to WiFi network, follow the steps provided in the link below.
How to Troubleshoot a WiFi Network
In this tutorial, you have learned how to configure wireless on Teracom modem for BSNL Internet connection. You have also learned how to enable wireless security with BSNL connection. Teracom modem WiFi configuration is the same for most of the Teracom models. To learn how to configure Teracom modem with BSNL connection click on the link below. The configuration step is same for most of the BSNL type 2 modems.
How to Configure Broadband On BSNL Modem in PPPoE Mode
Technology Blog
Comments
Near new latest BELKIN N Ultra Speed Wireless Modem cum Router on sale which is a best fit plug and play for any ADSL broadband
connection esp BSNL/Airtel. No need to pay anything anymore on renting or as caution deposit for Modem/Router from your providers.
This model with modem is not yet launched in India which provides speeds upto 300mbps. Check this site for more information: http://www.sethiainfotech.com/belkin-n-wireless-modem-router-f5d8636sa4a.html
Leaving for abroad and selling it just for 4k rupees.
Contact me @ gotovamsee@gmail.com/+919177971000 now.
Teracom BSNL Modem Wirless Settings
Follow us
Teracom Modem Dealers Delhi
I am now using WEP 64 bit encryption in teracom modem but don't think it is enough ? Can I upgrade to WPA without any issue ?
Yes, we can enable WPA protection in BSNL Teracom modem. While selecting the wireless security settings you should select Wi-Fi Protected Access (WPA) and create a pass phrase for it.
I always recommend you to enable WPA in your Teracom modem than enabling WEP in it. WPA is more secure compared to WEP.
If still your Portable Play Station is not connecting to the Teracom wireless network, you may degrade your wireless security to WEP. It is because WPA sometimes shows compatibility and connectivity issues.
Hop this will help.
Could you please explain a little bit more about your issue?
Some of the tips to fix the connection issues between your BSNL Wireless modem and nokia C3:
1. Disable the security (wireless encryption ) and try to connect.
Check whether you can connect or not
2. Change the Wireless network Name and Wireless channel.
Say Wireless network name (SSID) = Kavi
Wireless channel (1,6 or 11)
3. Make sure your Modem has latest firmware
I recommend you to follow the thread for more help.
http://discussions.europe.nokia.com/t5/Cseries/nokia-c3-wlan/td-p/711188
through USB by TERACOM BSNL type 6 modem ?
if yes what shal i do ?
Can you elaborate your question a little more?
I HAVE CALLED THE BSNL person who cannot figure this out
Please help
Could you tell me the results of flowing operations:
1. On command prompt please type
ping 192.168.1.1 and press enter
check whether you get reply from 192.168.1.1 (Teracom modem IP address)
2. Ping 4.2.2.2
Please tell me what is the result.
and check whether you type the correct user name and password given from BSNL. If you type wrong user name or password while configuring the teracom modem, you will not be able to access Internet.
I am new to BSNL, I did set upthe Lan and it is perfect. but Wireless I couldnt figure out what the issue is.
in setup, i have following settings:
Select profile: 802.11B/G
Country : INI
Channel selection : Auto
Select channel: 2 (this number keeps changing)
SSIS: Rev
Hide SSIS: NO
Security: 64 Bit
Tx Index key: 0
Key method: Directket
key: 123457abcd
PMK checking: Enabled
and did hit confirm
when i refresh the available wireless networks i could see my network, when i connect it with the key, it keeps trying and comes back with 'Available' rather than connecting. please help
i have done all the above mention step . still i m gettng an error
"the network did not assign a valid ip address in a given time .you may not have connectivity to network"
http://www.corenetworkz.com/2011/01/network-did-not-assign-valid-ip-address.html
Thanks again!
the Security Key which u r entering for security purpose, all should be entered numbers only not mixing letters and numbers.. if u are encripting with 64 bit also u should enter 10 digits only...
If you select the option direct key, you should manually give a 10 digit hexa decimal key.
Eg: 1234567890
I have got a wireless printer (Dell V313)which I am not able to pair with the network. I have a wireless internet connection and a wireless enabled laptop (Dell).
I am could connect my laptop to the internet without any problem. But my lap is not getting connected with the printer. The printer's WiFi signal is searching for signals but it is not able to find a device.
Do I need a router for connecting the printer wirelessly?
Hope I have not confused too much?
Anoob
To be frank, I never understood what you suggested to do. However, I tried to connect through the modem and it worked..
Eearlier I was trying to connect the printer directly to the laptop; in vain. Now, I switched on the wireless modem ( It is a router as per the Dept JTO), the printer and the laptop and tried to set up the printer as per the installation procedure. The printer got connected.
Anyway thank you for the suggestions.
Anoob.
what may be the reason?
Have you created a wireless key for the wireless network from teracom modem ?
I recommend you to follow the steps provided in the link below.
http://www.corenetworkz.com/2010/06/wireless-network-keep-connecting-and.html
It seems you configured your Teracom modem with custom user name and password. Try to find the right user name and password or you have to reset the modem and reconfigure it.
To know how to reset a modem, follow the steps in the link below.
http://www.corenetworkz.com/2010/06/how-to-reset-router-or-modem-hard-reset.html
http://blog.thahir.com/computer/configure-bsnl-wifi-modem-for-reliance-wired-broadband/
Thanks for the response!
It is normal, modem produces heat while it is working. So better make sure there is a proper air circulation.
Hi Amit,
If you find hardware issues with your BSNL modem, you should contact the local BSNL exchange. They will either repair or replace your faulty modem without any additional charges since it is under warranty period.
Dolphus dolphusp@yahoo.com
It seems your primary need is to reconfigure D-link AP with BSNL modem. To do this please follow the link below
http://www.corenetworkz.com/2009/09/configure-d-link-wireless-access-point.html
but can't browse any of d site....
i have tried to connect from sony xperia too... d problem is same with dis too... and my connection is working on d desktop...
plz sir help me out...
For wireless issues please follow the steps provided in the link below.
http://www.corenetworkz.com/2010/06/wireless-network-keep-connecting-and.html
Wat is this.. It shows blank in my configuration page..
wat can i do
To know more about port forwarding in BSNL modem, click on the link below.
http://www.corenetworkz.com/2012/03/how-to-perform-port-forwarding-in-bsnl.html
Can you give us more details ?
In order to configure your BSNL modem in mts broad band connection, you have to have the configuration details from mts broad band customer care. Though some values are different the configuration of the modem is similar to the above post.
In order to configure your BSNL modem in mts broad band connection, you have to have the configuration details from mts broad band customer care. Though some values are different the configuration of the modem is similar to the above post.
Is it a wireless laptop or connecting with an Ethernet cable ?
i have bsnl teracom wifi router and i have got a new MTS usb modem. how can i configure it, kinly do a favour to me.
devinder
If the default combination does not works, you might have configured a different user name and passowrd. So please try to remember that other wise the only option is reset and reconfigure the modem. But after reset you will loose all previous configuration.
http://www.corenetworkz.com/2010/06/how-to-reset-router-or-modem-hard-reset.html
Aleem
aleemuddin.as@gmail.com
I couldn't find any options in Teracom modem to accomplish the specified need.
This saved my Business!!!
who ever you are .. you are awesome!
m getting msg again n again- connection to server 192.168.1.1 failed.
what can i do??
http://www.corenetworkz.com/2010/11/not-able-to-access-routers-web-based.html
I have a teracom modem and I have configured it according to your instructions on this blog. Also I have enabled the wireless on the modem and done all the settings. Now both my laptop and desktop connects to the internet at the same time, one through wireless connection and other through LAN cable respectively.
Usually I used to connect my desktop to internet by using a username n password but now after all the above configurations I don't have to use the username n password to connect to internet and the desktop connects automatically.
The problem is that while I am connected to internet via wireless on my laptop I don't want the desktop to connect to internet directly without using username and password.
What settings do I need to do so that my desktop doesn't connect to internet directly?
I Connect to modem using RJ-45 Cable...
Please help guys!!!!!!!!!!
You may reset the modem and do a power cycle to fix it. After this you should try to update the firmware.
How to reset a modem
How to Power Cycle Modem
Doing PPPoE configuration, the user name and password are saved in modem and so you do not need to type them again to connect to Internet. Thats why your Desktop and Laptop connect to the Internet automatically without asking the User name and Password provided by your ISP. If you do not want this facility you should delete the PPPoE configuration and perform a bridge connection in your modem. So you should select bridge instead of PPPoE while configuring modem to ask the desktop before connecting to Internet.
First step is to verify whether other computers connected to Teracom modem are going online? Please verify Internet configuration in Teracom first before start troubleshooting your Android phone.
Unable to Join Teracom Network
You should make sure that Teracom modem is running on latest firmware version. If the issue persists flash the firmware.
I recommend you to change the wireless network name (SSID) from Teracom modem and then try to connect to the new network name from your phone.
i have bsnl dataone modem.. i think i made a mistake while writing password(admin) or while the password of my modem while accessing 192.168.1.1
now i m not able to connect to the internet and when i go to 192.168.1.1 it asks me for the password 3 times and shows the message "protected area".. help me please
If you forget your BSNL Modem password, please try the solution provided in the link below.
http://www.corenetworkz.com/2010/06/forgot-my-router-password-and-cannot.html
To reset and reconfigure Teracom modem, use the instructions in the following link
http://www.corenetworkz.com/2010/06/how-to-reset-router-or-modem-hard-reset.html
Even bsnl guys cannot restore wifi connection. Pl help.
1. Are you using any wireless devices like cordless phone in your home ? If yes it might cause interference.
2. Have you updated the firmware on Teracom router ?
I don't think Teracom modem provided by BSNL supports network printer. Can you give me the exact model number of your modem ?
for that I am not able to entering to the tab it stock in the wifi page after selecting the language page.
all my phones including a Samsung s3, tab and also my laptop all switch automatically connected to the wifi router.
I wake up in the morning and just press again the connect button. Bingo...it is connected..!!! Not understand why it is behaving like this. I am not done any changes in routers settings also.
Same problem happen again when I turn off and on the router. my tablet not detected while phones are ok. should I change the router :confuse:
:help: :help: :help:
Is it not connecting b'coz the routers frequency mismatch or anything else ??
what could be the solution ?
Please help.
thanks in advance
From the details of your comment, it is clear that the issue is at your Nexus 10 side. I recommend you to follow the steps provided in the link below.
http://www.corenetworkz.com/2010/06/wireless-network-keep-connecting-and.html
Can you please help me how to connect windows 8 via teracom type 2 modem with bsnl connection i am not able to connect it says limited access or no connectivity please help
I recommend you to follow the instructions provided in the link below.
http://www.corenetworkz.com/2010/06/forgot-my-router-password-and-cannot.html
@Krishna
Are you trying to connect via wireless or Ethernet cable ? If it is a wireless connection, I recommend you to follow the steps provided in the link below.
http://www.corenetworkz.com/2009/04/my-computer-is-not-detecting-any.html
Seems a strange issue. Since the modem is giving connection to two devices (except two android phones)at the same time I think the routing feature is working fine.
I suggest you to update the modem firmware and check for the issue. To download firmware, you might contact BSNL customer care.
You may try the steps explained in the post
http://www.corenetworkz.com/2010/06/forgot-my-router-password-and-cannot.html
I recommend you to follow the steps mentioned in the link below.
http://www.corenetworkz.com/2010/06/wireless-network-keep-connecting-and.html
I have a samsung galaxy a5 and teracom BSNL modem. My phone's wifi not obtain the IP address and not connect with wifi. I m so worried about this... other wifi connection are connect but above teracom bsnl modem is not connect.
Plz reply soon
I suggest you to follow the instructions provided in the link below.
http://www.corenetworkz.com/2010/06/wireless-network-keep-connecting-and.html
If this modem (Teracom T2-B-Gawv1.4U10Y-BI) is supplied by BSNL, you can follow the same instructions provided in this tutorial to enable and setup WiFi pasword.
Pls provide steps.
Regards
R.Srinu
For which model of Teracom WiFi router you want to limit the download speed ?
Then there is saying Authentication Required
When i Enter User name = admin
and password = admin
that is not working Username and password
Please tell me what is the password of modem name = Bsnl Teracom TDSL300w2
Hi Abhinav,
I recommend you to follow the steps provided in the link below.
http://www.corenetworkz.com/2010/06/forgot-my-router-password-and-cannot.html