Enable security for your Wireless network is very important to prevent any unauthorized access to your network. Here we can see how to configure wireless security in BSNL WA 3002 G4 Type 2 modem to prevent any third party access to your wireless network. If you want to have a look on Internet configuration steps for WA 3002 G4 BSNL modem, please click on the link below.
(Both type modems have same configuration steps.)
Configure Wireless Security in WA 3002 G4
1. Click in Wireless
In order to enable wireless and wireless security in BSNL type 2 WA 3002 G4 modem, click on Wireless tab on the right hand side.
i. Check enable wireless
ii. Write desired Wireless Network Name at SSID
2. Click on Security
To enable wireless security in WA 3002 G4 - BSNL Type 2 modem, click on security under wireless. To select right network encryption for your wireless click on network authentication.
i. Network Authentication : WPA-PSK
ii. Enter WPA Pre-shared key (The key to access wireless network).
3. Reboot the modem to save settings permanently
To save changes permanently, go to management and click on Save/Reboot.
Other BSNL Modem Configuration guides
1. Setup Wireless and Security in BSNL Teracom Modem
2. Enable Wireless in BSNL Modem